Suggestions

Waste Water Treatment

Very low-impact treatment for waste water

Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What's more, with precisely metered additives and optimised processes, you also save money.

Requirements - Waste Water Treatment

 

ProMinent waste water treatment solutions reduce environmental impact by achieving very high waste water quality. That means you can focus on production, knowing that the fully automated ProMinent waste water neutralisation system is working in the background to clean the water in line with strict mandatory requirements. Depending on the nature of the waste water, the pH can be controlled and brought to the required level, for example. pH sensors transmit the measured values to a controller. If the value varies from a specified level, a metering pump adds acid or lye to restore the pH to neutral. And of course, metering is very accurate to keep the consumption of expensive chemicals as low as possible.

Downloads for Waste Water Treatment

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

ProMinent waste water treatment solutions reduce environmental impact by achieving very high waste water quality. That means you can focus on production, knowing that the fully automated ProMinent waste water neutralisation system is working in the background to clean the water in line with strict mandatory requirements. Depending on the nature of the waste water, the pH can be controlled and brought to the required level, for example. pH sensors transmit the measured values to a controller. If the value varies from a specified level, a metering pump adds acid or lye to restore the pH to neutral. And of course, metering is very accurate to keep the consumption of expensive chemicals as low as possible.

Downloads

Suitable products - Waste Water Treatment

The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

more

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

more

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eX cellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering of environmentally-hazardous substances.

more

Polymer preparation station ULTROMAT ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

more

The ProMinent metering system ULTROMAT ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

more

The polymer preparation system DULCODOS ULIa is an inline system and processes liquid polymers to produce a fully activated solution. It is ideally equipped for your application with integrated mixing and maturing chamber and novel peristaltic metering pump.

more

The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

more

Manual polymer batching station ULTROMAT MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.

more

Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic cleaning.

more

The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

more

As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

more

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

more

Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for a very wide range of water qualities.

more

Widely used sensor for the measurement of oxygen dissolved in water above 0.1 ppm to oxygen saturation. For installation in standard immersion pipes or in the bypass line of the process flow. Use in aeration tanks of clarification plants, waterworks, in fish breeding or to monitor surface water. Minimal maintenance due to visual measuring principle.

more

Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and wastewater, suitable for pH values up to 9.5.

more

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

more

ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

more

Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real-time.

more

Measurement of peracetic acid concentration with DULCOTEST sensors: Precise and reliable for disinfection in safety-sensitive applications in the food, pharmaceutical and medical industries. Can also be used in wastewater treatment.

more

pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

more

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

more

Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

more

Conventional wastewater treatment cannot adequately remove trace elements, such as medication or cosmetic residue, from the wastewater. This is particularly effective using the complete system for the precise metering of powdered active carbon (PAC).

more

OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 420 g/h of ozone from compressed air.

more

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO2 discontinuously using the acid/chlorite process with diluted chemicals.

more

Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

more

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

more

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

more

Monitoring and treatment of wastewater with DULCOTROL Wastewater – the compact measuring and control system specially designed for applications in municipal and industrial wastewater treatment.

more

Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

more

The 4…20 mA transmitters for pH, ORP, fluoride, temperature and PEROX sensors enable safe and fault-free transmission of the sensor signal to the controller. Thanks to simple installation directly on the sensor, a stable signal transmission over larger distances can be ensured too.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The metering system POLYMORE is an inline batching station in which the liquid polymer is introduced into the pressure-encapsulated multi-zone mixing equipment with the dilution water through a peristaltic pump. The result is a prepared and homogeneous polymer solution.

more

DULCOZON OZLa is an ozone generator with low life cycle costs. It combines a high ozone concentration with unbeatable efficiency.

more

DULCOFLEX DFXa meters outgassing, viscous, abrasive or shear-sensitive media and is setting new standards in metering. Linear and reproducible metering (± 1 %) is guaranteed with this peristaltic pump under all process conditions. Hose replacement is a very simple process.

more

The modular bypass armature BAMa accommodates ProMinent sensors for water treatment. The armature is simply installed in a bypass of the main process line. It is available in various variants, each perfectly designed for special water treatment applications – from drinking water, water for pool & wellness to industrial water.

more

Contact us

Tze Lin Mak

Managing Director, ProMinent Fluid Controls PFC far East Pte Ltd.

»Please send us your request! We will contact you shortly.«

+65 6747 4935  Send request   

References - Waste Water Treatment

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now