Suggestions

DULCOTEST sensors for free chlorine

Graduated measuring ranges 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Product description

Reliable online measurement of free (effective) chlorine – with DULCOTEST sensors.

Free chlorine is the most important disinfectant in the world. This term is used to refer to the compounds Cl2 (elementary chlorine), HOCl (hypochlorous acid) and OCl- (hypochlorite).

Our product line of DULCOTEST sensors for free chlorine provides five product ranges optimised for different applications. Each product range consists of several types with different measuring ranges.

The proven diaphragm-covered standard sensor for free chlorine CLE3 is used to monitor or control all types of clear water, for example in the disinfection of potable water. The variant CLE3.1 is especially suitable for an excess of combined chlorine Mono-, di-, trichloroamine. The measuring result of type CLE (free chlorine) is subtracted from the ... more in the glossary, providing the most accurate results in the calculation of combined chlorine Mono-, di-, trichloroamine. The measuring result of type CLE (free chlorine) is subtracted from the ... more in the glossary from the measurement of total chlorine Total of free and combined chlorine. Recommended sensor: Type CTE, reference method DPD4. more in the glossary and free chlorine.

Sensors CLB2 and CLB3 are easy-to-operate, low-cost chlorine sensors without a diaphragm for clear water without pollution.

Sensor CLO1 is particularly suitable for in-line electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary processes where unwanted compounds may be formed; sensor CLO2 is also ideal for hot water disinfection.

Sensor CBR1 can be used in contaminated water, even for high pH values of up to 9.5, for example in the disinfection of cooling water.

Sensor CLR1 has been optimised for the disinfection or washing of foodstuffs and tolerates contaminated water and chlorine concentrations of up to 1,000 mg/l.

Your benefits

  • Five different sensor ranges and numerous different versions deliver the following benefits: use with a wide range of water qualities (pH, salinity, temperature, chemical and contamination load), use in combination with many disinfection processes: chlorine gas, sodium hypochlorite, calcium hypochlorite, electrolysis, use in a wide measuring range of 0.01 to 1,000 mg/l.
  • Precise, real-time amperometric measurement for efficient process control (short response time)
  • Amperometric measuring eliminates interference caused by turbidity or colouration
  • Stable zero point
  • Integrated temperature compensation eliminates interference caused by influence of temperature
  • For sensors with diaphragm-covered measuring electrodes: reduced dependence on flow, substances in water and film-forming media. Diaphragm-covered measuring electrodes embedded in an electrolyte ensure long service life. This maintains optimum measuring conditions regardless of process conditions. Low-cost maintenance thanks to easy diaphragm cap changes.
  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

Chlorine measurement in potable, swimming pool, cooling, industrial, process, rinsing and wastewater as well as seawater and salt water

    Technical Details

    Free chlorine (hypochlorous acid HOCl)

    • CLE 3; pH: 5.5 … 8.0; Temp. 5 … 45 °C
    • CLE3.1; pH: 5.5 … 8.0; Temp. 5 … 45 °C
    • CLO 3; pH: 5.0 … 9.0; Temp. 5 … 45 °C
    • CLO 4; pH: 5.0 … 9.0; Temp. 5 … 70 °C
    • CLB 4; pH: 5.0 … 9.0; Temp. 5 … 45 °C
    • CLB 5; pH: 5.0 … 9.0; Temp. 5 … 45 °C
    • CBR 1; pH: 5.0 … 9.5; Temp. 5 … 45 °C
    • CLR 1; pH: 5.5 … 8.0; Temp. 5 … 45 °C

    Sensor for Free Chlorine CLE 3-mA

    Standard sensor for measuring free chlorine in clear water. For operation on controllers with 4-20 mA input

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or substances in the water

    Chlorine sensors complete with 100 ml of electrolyte

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Sensor for Free Chlorine CLE 3.1-mA

    Sensor for the measurement of free chlorine in clear water with higher selectivity towards combined chlorine. For use on controllers with 4-20 mA input

    Your Benefits

    • Measured variable: free chlorine, no cross-sensitivity to combined chlorine (chloramines), even if there is an excess of it
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or substances in the water

    Chlorine sensors complete with 100 ml of electrolyte

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Sensor for Free Chlorine CLE 3-DMT

    Standard sensor for measuring free chlorine in clear water. For operation on ProMinent transmitters type DMT

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or substances in the water

    Chlorine sensors complete with 100 ml of electrolyte

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Sensor for free chlorine CLE 3-CAN

    Standard sensor for measuring free chlorine in clear water. For use on controllers with CAN-bus connection

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or substances in the water
    • Operation on the CAN-bus with all the associated benefits

    Chlorine sensors complete with 100 ml of electrolyte

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Sensor for free chlorine CLE 3.1-CAN

    Sensor for the measurement of free chlorine in clear water with higher selectivity towards combined chlorine. For use on controllers with CAN-bus connection

    Your Benefits

    • Measured variable: free chlorine, no cross-sensitivity to combined chlorine (chloramines) even if there is an excess of it
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or substances in the water
    • Operation on the CAN-bus with all the associated benefits

    Chlorine sensors complete with 100 ml of electrolyte

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Sensor for free chlorine CLO 3-mA

    Sensor for the measurement of free chlorine in clear water, as well as in seawater, and when using electrolysis processes for disinfection, up to 45 °C (1 bar) or 8 bar (25 °C). For operation with controllers with 4-20 mA input. Also suitable for use in film-forming water with optional "hydrodynamic cleaning".

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Use when sample water is returned to the process line
    • Use at higher pressures
    • Avoidance of problems caused by electrolysis systems in which the electrodes are immersed directly into the sample water
    • Measurement of free chlorine up to pH 9
    • Measurement in seawater possible
    • Also suitable for use in film-forming water with optional "hydrodynamic cleaning".

    Sensor for free chlorine CLO 1-CAN

    Sensor for the measurement of free chlorine in clear water even when using electrolysis processes for disinfection, up to 45 °C (1 bar) or 8 bar (25 °C). For use on controllers with CAN-bus connection. Also suitable for use in film-forming water with optional “hydrodynamic cleaning”.

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Use with return of the sample water to the process line
    • Use at higher pressures
    • Minimisation of faults by electrolysis systems in which the electrodes are immersed directly into the sample water (without diaphragm) by open sensor (no diaphragm) and gold electrodes
    • Measurement of free chlorine up to pH 9
    • Also suitable for use in film-forming water with optional “hydrodynamic cleaning”.

    Sensor for free chlorine CLO 4-mA

    Sensor for the measurement of free chlorine in clear water, as well as in seawater, and when using electrolysis processes for disinfection, up to 70 °C or 8 bar (25 °C). For operation with controllers with 4-20 mA input. Also suitable for use in film-forming water with optional "hydrodynamic cleaning".

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Use when sample water is returned to the process line
    • Use at higher pressures/temperatures
    • Avoidance of problems caused by electrolysis systems in which the electrodes are immersed directly into the sample water
    • Measurement of free chlorine up to pH 9
    • Measurement in seawater possible
    • Also suitable for use in film-forming water with optional "hydrodynamic cleaning"

    Sensor for free chlorine CLB 4-µA

    Cost-effective, simple sensor for the measurement of free chlorine in clear water, also in seawater and with a changing media temperature. Can also be used with electrolysis processes for disinfection at up to 45 °C/3 bar. For operation with the Compact controller DCCa

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Cost-effective due to its simple construction without separate wear parts
    • Simple, cost-effective maintenance without handling of the diaphragm caps
    • Avoidance of problems caused by electrolysis systems without a diaphragm in which the electrodes are immersed directly into the sample water
    • Measurement of free chlorine up to pH 9 and use at high pressure of up to 3 bar thanks to absence of a diaphragm
    • Measurement in seawater possible

    Sensor for free chlorine CLB 5-µA

    Cost-effective, simple sensor for the measurement of free chlorine in clear water, also in seawater and with a constant media temperature. Can also be used with electrolysis processes for disinfection at up to 45 °C/3 bar. For operation with the Compact controller DCCa

    Your Benefits

    • Measured variable: free chlorine, no significant cross-sensitivity to combined chlorine (chloramines)
    • Cost-effective due to its simple construction without separate wear parts
    • Simple, cost-effective maintenance without handling of the diaphragm caps
    • Avoidance of problems caused by electrolysis systems without a diaphragm in which the electrodes are immersed directly into the sample water
    • Measurement of free chlorine up to pH 9 and use at high pressure of up to 3 bar thanks to absence of a diaphragm
    • Measurement in seawater possible

    Sensor for Free Chlorine CBR 1-mA

    Sensor for free chlorine and bromine in contaminated water, also suitable for high pH values of up to 9.5. For use with controllers with 4-20 mA input

    Your Benefits

    • Measured variable: free chlorine, as well as free and combined bromine (bromamines)
    • Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
    • Resistance to films of dirt and biofilms by electrolyte with antimicrobial effect and large-pore diaphragm
    • Use at high pH value of up to 9.5 by optimisation of the electrolyte diaphragm system

    Sensor for free and combined bromine CBR 1-CAN

    Sensor for free chlorine and bromine in contaminated water, also suitable for high pH values of up to 9.5. For use on controllers with CAN-bus connection.

    Your Benefits

    • Measured variable: free chlorine as well as free and combined bromine (bromamines)
    • Diaphragm-covered sensor minimises faults caused by changing flow or ingredients in the water
    • Resistance to films of dirt and biofilms by electrolyte with antimicrobial effect and large-pore diaphragm
    • Use at high pH value of up to 9.5 by optimisation of the electrolyte diaphragm system

    Sensor for Free Chlorine CLR 1-mA

    Sensor for free chlorine above 10 ppm in contaminated washing water for use with controllers with 4-20 mA input

    Your Benefits

    • Measured variable free chlorine for high concentrations of up to 1,000 ppm
    • Diaphragm-covered sensor prevents faults caused by changing flow or ingredients in the water
    • Resistance to films of dirt by pore-free diaphragm

    Important note: Measuring range from 10.0 ... 1,000 mg/l on request

    A mounting kit, order no. 815079, is required for initial fitting of the chlorine sensors in the in-line probe housing DLG III.

    Downloads for DULCOTEST sensors for free chlorine

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Reliable online measurement of free (effective) chlorine – with DULCOTEST sensors.

    Free chlorine is the most important disinfectant in the world. This term is used to refer to the compounds Cl2 (elementary chlorine), HOCl (hypochlorous acid) and OCl- (hypochlorite).

    Our product line of DULCOTEST sensors for free chlorine provides five product ranges optimised for different applications. Each product range consists of several types with different measuring ranges.

    The proven diaphragm-covered standard sensor for free chlorine CLE3 is used to monitor or control all types of clear water, for example in the disinfection of potable water. The variant CLE3.1 is especially suitable for an excess of combined chlorine Mono-, di-, trichloroamine. The measuring result of type CLE (free chlorine) is subtracted from the ... more in the glossary, providing the most accurate results in the calculation of combined chlorine Mono-, di-, trichloroamine. The measuring result of type CLE (free chlorine) is subtracted from the ... more in the glossary from the measurement of total chlorine Total of free and combined chlorine. Recommended sensor: Type CTE, reference method DPD4. more in the glossary and free chlorine.

    Sensors CLB2 and CLB3 are easy-to-operate, low-cost chlorine sensors without a diaphragm for clear water without pollution.

    Sensor CLO1 is particularly suitable for in-line electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary processes where unwanted compounds may be formed; sensor CLO2 is also ideal for hot water disinfection.

    Sensor CBR1 can be used in contaminated water, even for high pH values of up to 9.5, for example in the disinfection of cooling water.

    Sensor CLR1 has been optimised for the disinfection or washing of foodstuffs and tolerates contaminated water and chlorine concentrations of up to 1,000 mg/l.

    Your benefits

    • Five different sensor ranges and numerous different versions deliver the following benefits: use with a wide range of water qualities (pH, salinity, temperature, chemical and contamination load), use in combination with many disinfection processes: chlorine gas, sodium hypochlorite, calcium hypochlorite, electrolysis, use in a wide measuring range of 0.01 to 1,000 mg/l.
    • Precise, real-time amperometric measurement for efficient process control (short response time)
    • Amperometric measuring eliminates interference caused by turbidity or colouration
    • Stable zero point
    • Integrated temperature compensation eliminates interference caused by influence of temperature
    • For sensors with diaphragm-covered measuring electrodes: reduced dependence on flow, substances in water and film-forming media. Diaphragm-covered measuring electrodes embedded in an electrolyte ensure long service life. This maintains optimum measuring conditions regardless of process conditions. Low-cost maintenance thanks to easy diaphragm cap changes.

    Video

    Application

    Technical Data

    Downloads

    Contact us

    Tze Lin Mak

    Managing Director, ProMinent Fluid Controls PFC far East Pte Ltd.

    »Please send us your request! We will contact you shortly.«

    +65 6747 4935  Send request   

    Matching Products

    ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

    more

    pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

    more

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

    more

    Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

    more

    Monitoring and treatment of wastewater with DULCOTROL Wastewater – the compact measuring and control system specially designed for applications in municipal and industrial wastewater treatment.

    more

    Monitoring and treatment of potable and similar types of water with DULCOTROL Potable water/F&B – the compact measuring and control system specially designed for water treatment in waterworks and in the food and beverage industry.

    more

    As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

    more

    The chlorine metering system DULCODOS Pool Comfort is the convenient solution for pH adjustment and disinfection of swimming pool water with liquid chlorine products. Remote access to the in-built web server via Wi-Fi and LAN.

    more

    Chlorine metering system for individual adjustment and monitoring of all common hygiene auxiliary parameters in public pools. DULCODOS Pool Professional ensures crystal-clear water quality and lowers operating costs thanks to Eco!Mode.

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now