Suggestions

Suction Lances, Suction Assemblies and Level Switches for Motor-Driven Metering Pumps

Suction lances, suction assemblies and level switches for a smooth metering process

Product description

The right kits for every metering task

The suction lance is installed at the lower end of the suction hose. It fixes the hose in the tank. This is particularly useful when there is a stirrer in the dosing tank. At the end of the suction lance is a foot valve with filter mesh. This protects the suction line from large particles and contaminants.

Suction assemblies are available with or without level monitoring.

The level switch signals the liquid level of the storage tank. In one-stage versions it transmits the signal when the tank is empty; in two-stage versions it also issues a warning before the tank is empty.

The benefits for you

  • Fixes the suction hose
  • Protects against large dirt particles and contamination
  • Signals the empty message of the supply tank
  • Signals the liquid level of the supply tank

Suction assembly PPE for tanks up to 1,500 litres

Suction assembly without level switch comprising a support pipe, foot valve and threaded connector. The length L of the support pipe can be adjusted (shortened) by the customer.

Note: In applications with a hose, the suction assembly/hose connector kit, consisting of a PVDF screw-in nozzle and a PTFE-shaped composite seal, can be used.

  • p_ac_0203_sw

Suction assembly PCB for tanks up to 1,500 litres

Suction assembly without level switch comprising a support pipe, foot valve and threaded connector. The length L of the support pipe can be adjusted (shortened) by the customer.

Note: In applications with a hose, the suction assembly/hose connector kit, consisting of a PVDF screw-in nozzle and a PTFE-shaped composite seal, can be used.

Important: The product contains connections bonded with Tangit. Always note the durability of Tangit adhesive.

  • p_ac_0203_sw

Connector kit for suction assembly - hose

Comprising PVDF screw-in nozzle and a PTFE-shaped composite seal.

Suitable for PPE suction assembly for 1000 l tank

  • P_AC_0399

PPE Universal Suction Lance

Universal suction lance made of PP in 4 sizes for use in canisters, barrels or containers. The suction lance is configured as standard with return, ventilation function and 2-stage level monitoring. The height-adjustable level switch and tank threaded connectors ensure flexible adaptation to the process or tank height. In addition, the suction tube length can easily be shortened by the customer. A PTFE ball check is incorporated and prevents the suction line from running dry. With IBC container suction lances (1039399, 1046672), the screw lid DN150 can be installed by the customer onto other G2" vent openings.

The suction lance is supplied with all additional parts in cardboard packaging.

Material version: PP with EPDM seals.

Suction connector is not supplied ready mounted. Fittings and pressure hose sleeves in DN 10, DN 15, DN 20, DN 25 (not for canisters) plus FKM seal form part of the scope of delivery.

Return connector is not supplied ready mounted. Fittings and pressure hose sleeves in DN 10, DN 15, plus an FKM blanking plug and seal form part of the scope of delivery. Max. flow 130 l/h, 2 bar.

Level: Level switches are protected by tube sections in drum and container lances. The lance level output is in the form of an M12 plug. Please place a separate order for the level signal cable for connection to ProMinent metering pumps or a PLC or terminal box.

Tank connection: 20 l and 20-60 l canisters: Ø 50 screw lid  200 l drum: 70x6 opening in plastic bung drum IBC container: DN150 IBC cap

PPE universal suction lance, 'physiologically safe' design

The universal suction lance is also available as a 'Physiologically safe (FDA) in respect of wetted materials' design.

Suction lance with two-stage level switch

Suction lance with two-stage level switch in PVC protective tube Ø 50 with check valve in DN 10-DN 25, flap valve in DN 32 (valve is not removable).

For sizes DN 10/15 and DN 20/25, connector components for both sizes plus a dummy panel for the return line are included in the scope of supply. A return line is not available for suction lances of size DN 32. Barrel suction lances are fitted with a barrel lid.

2-stage level switch is wired to a terminal in the head.

Level sensor cable must be ordered separately.

Special designs (materials, functions, Dytex adhesive etc.) are available on request.

Reed cable with round 3-pin connector, PE

Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.

Suction lance for 200 l/600 l drum

L1: Length up to return
L2: Length up to suction connector
L3: Overall length

Suction lance for 1,000 l container

L1: Length up to return
L2: Length up to suction connector
L3: Overall length

  • P_AC_0277
  • P_AC_0276

Level Switch Kit Complete, PVDF, Two-Stage with Round Connector or Lead

The level switch set can be ordered in conjunction with the DN 10 - DN 32 suction assemblies.

For level monitoring in the supply tank, two-stage with pre-warning alarm message and switch-off of the metering pump after a further 30 mm reduction in level.

Switching mode when liquid level low: 2 x N/C

Technical data:

Max. switching voltage: 24 V

Switching current: 0.5 A

Switching power: 5 W/5 VA

Temperature range: -10 °C to 65 °C

Degree of protection: IP 67

Material:

Body of level switch PVDF, float PE, fastening lug PVDF, cable holder PE, anti-kink protection PE, cable PE.

  • pk_2_035

Downloads for Suction Lances, Suction Assemblies and Level Switches for Motor-Driven Metering Pumps

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

The right kits for every metering task

The suction lance is installed at the lower end of the suction hose. It fixes the hose in the tank. This is particularly useful when there is a stirrer in the dosing tank. At the end of the suction lance is a foot valve with filter mesh. This protects the suction line from large particles and contaminants.

Suction assemblies are available with or without level monitoring.

The level switch signals the liquid level of the storage tank. In one-stage versions it transmits the signal when the tank is empty; in two-stage versions it also issues a warning before the tank is empty.

The benefits for you

  • Fixes the suction hose
  • Protects against large dirt particles and contamination
  • Signals the empty message of the supply tank
  • Signals the liquid level of the supply tank

Technical Data

Downloads

Contact us

Tze Lin Mak

Managing Director, ProMinent Fluid Controls PFC far East Pte Ltd.

»Please send us your request! We will contact you shortly.«

+65 6747 4935  Send request   

Matching Products

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now