Immersion Assembly Type IMA-ICT 2
To hold one inductive conductivity sensor of type ICT 2.
Dimensions Table: Flange
Flange | DN 80/PN 16 |
Ø D | 200 mm |
Ø K | 160 mm |
Ø d2 | 8 x 18 mm |
b | 20 mm |
Ø a | 63.5 mm |
Screws | M 16 |
Adaptation to processes through flange installation in tank from top.
PP Immersion Assembly Type lPHa 1-PP
Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.
Note: Measuring lines are not included in the scope of delivery.
Dimensions Table: Flange
Fixed flange | DN 40 |
Hole circle Ø K | 110 mm |
Screws | 4 x M16 |
Thickness d2 | 18 mm |
Diameter Ø D | 150 mm |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 1
PP Immersion Assembly Type lPHa 3 -PP
To hold max. three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can shorten the immersion pipe themselves. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out. Measuring lines are not included in the scope of delivery. Technical data as for fitting IPHa 1, except the immersion tube diameter is 75 mm.
Dimensions Table: Flange
Fixed flange | DN 65 |
Hole circle Ø K | 145 mm |
Screws | 4 x M16 |
Thickness d2 | 18 mm |
Diameter Ø D | 185 mm |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 3
PVC Immersion Assembly Type ETS 1 P
Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.
Immersion Assembly Type TA-LM
To hold one conductivity sensor of type LM and LMP with M 28 thread for side fasting with pipe clips (2 contained in the scope of supply) or with union nut/collar bush/screw-in part for fastening in a tank cover.
Union nut and screw-in part are to supplied by the customer (standard parts).
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.