In order to give you a better service ProMinent uses cookies. By continuing to browse the site you are agreeing to our use of cookies .

Suggestions
Products
See all results for products
new

Hydraulic Diaphragm Metering Pump Orlita® Evolution 1 LC

Capacity range single pump: 5 - 130 l/h, 260 - 28 bar

The Orlita® Evolution 1 LC meets the most exacting safety requirements as an extremely robust hydraulic diaphragm metering pump. It features a PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling and unique diaphragm position control.

Product description

Maximum process reliability and flexibility.

The Orlita® Evolution hydraulic diaphragm metering pump Evolution 1 LC is an extension of the proven Evolution pump. It boasts a 15-metre stroke length, covering the capacity range from 5 – 130 l/h at 260 – 28 bar. A wide range of drive versions is available, including some for use in Zone 1 or Zone 2 areas at risk from explosion with ATEX certification. The Orlita® Evolution product range is designed to comply with API 675.

Your benefits

  • Maximum process reliability
  • PTFE multi-layer diaphragm with integral diaphragm rupture warning system
  • Integral hydraulic relief valve
  • The diaphragm position control protects against impermissible operating statuses (e. g. no damage to the pump in the event of blockage on the suction or discharge side)
  • Metering reproducibility is better than ± 1 % within the 10 - 100% stroke length adjustment range under certain defined conditions and with proper installation
  • Continuous venting of the oil chamber ensures reliable operation

Field of application

  • Oil and gas industry
  • Metering of reactants and catalysts in the chemical industry
  • Volume-proportional metering of chemicals/additives in boiler feed water treatment
  • Level-dependent metering of auxiliary agents in industrial production engineering, for instance hot wax metering in the production of adhesive strips
    more more

    Technical Details

    • Stroke length: 0 - 15 mm, rod force: 2,000 N
    • Stroke length adjustment: 0 – 100 %
    • Stroke length adjustment: manually by means of a manual adjustment wheel and scaled display (optionally with electric actuator or control drive)
    • Metering reproducibility is better than ± 1% within the 10 – 100 % stroke length range under defined conditions and with correct installation
    • PTFE multi-layer diaphragm with electrical diaphragm rupture warning / signalling system via a contact
    • Integrated hydraulic relief and vent valve
    • Wetted materials: stainless steel 1.4404, special designs available on request, plastics PVC, PVDF, special designs available on request
    • A wide range of power end versions is available: three-phase standard motors also for use in Exe and Exde zones and different flange designs for the use of customised motors
    • Degree of protection: IP 55
    • Design in compliance with API 675, among others

    Downloads for Hydraulic Diaphragm Metering Pump Orlita® Evolution 1 LC

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by A to Z
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Maximum process reliability and flexibility.

    The Orlita® Evolution hydraulic diaphragm metering pump Evolution 1 LC is an extension of the proven Evolution pump. It boasts a 15-metre stroke length, covering the capacity range from 5 – 130 l/h at 260 – 28 bar. A wide range of drive versions is available, including some for use in Zone 1 or Zone 2 areas at risk from explosion with ATEX certification. The Orlita® Evolution product range is designed to comply with API 675.

    Your benefits

    • Maximum process reliability
    • PTFE multi-layer diaphragm with integral diaphragm rupture warning system
    • Integral hydraulic relief valve
    • The diaphragm position control protects against impermissible operating statuses (e. g. no damage to the pump in the event of blockage on the suction or discharge side)
    • Metering reproducibility is better than ± 1 % within the 10 - 100% stroke length adjustment range under certain defined conditions and with proper installation
    • Continuous venting of the oil chamber ensures reliable operation

    Application

    Technical Data

    Downloads

    Contact us

    Allen Mak

    Managing Director, ProMinent Fluid Controls PFC far East Pte Ltd.

    +65 6747 4935   
    Send request    

    »Please send us your request! We will contact you shortly.«

    +65 6747 4935  Send request   

    ProMinent Newsletter - receive latest news, customized for you! subscribe now